Omnidirectional Aantenna Specifications: V.S.W.R ≤ 2 Max Power 50w Connector RP-SMA male Height 15.5 CM Gain(dBi) 8dBi Applications WiFi / WiMAX / LTE Frequency & Gain 6dBi ± 0.5dBi @ 2400~2500MHz 8dBi ± 0.5dBi @ 5100~5800MHz Efficiency: 2400-2500 MHz 900-5900 MHz Compliant with 802.11ax, 802.11ac, 802.11n, 802.11b & 802.11g Compatible with intel NGFF M.2 desktop kit for example intel ax200 ax201 8265 ect Bluetooth devices wifi desktop card, Wireless Access Points & other wireless devices As access point antenna: Provides signal to clients in any direction (360-degree horizontal beamwidth). Compatible with 802.11a,b,g,n and 802.11ac 802.11ax and other Dual Band 2.4GHz / 5.8 GHz applications.
Antenna Cable Specifications: MHF4 To RP-SMA female (bulkhead) Length: 8 inches Applicable cable: 0.81mm RF coaxial cable Frequency Range: DC up to 6GHz (VSWR: 1.3 max. at 0.1~3GHz; VSWR: 1.4 max. at 3~6GHz) High productivity: Easy cable termination by “i-Fit” without soldering Application Technology: IEEE802.11 ax/ax/a/b/g/n, WiMax, Zigbee, Bluetooth Wireless One end has a MHF4 connector, and the other end has a RP-SMA female connector with a bulkhead-mount.
RP-SMA Female connector includes a bulkhead nut and washer: You can use this to mount the connector (and thus the cable) on the wall of an enclosure (to weatherproof the cable connection), case or Printed Circuit Bard (PCB). Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector. The length of our standard RP-SMA-female connector (threaded part) is 3/8 inches.
RP-SMA Female connector composition: Center Contact: Beryllium Copper, Gold Plated Connector Body: Brass, Gold Plated Crimp Ferrule: Copper, Nickel Plated Insulators: PTFE RP-SMA is a round scre
7dBi 2.4GHz 5GHz 5.8G Dual Band WiFi RP-SMA Male High Gain Antenna & MHF4 IPEX 4 to RP SMA Female Cable Antenna for NGFF M.2 IPEX4 MHF4 WiFi Card Wireless Routers PC Repeater Desktop PC FPV UAV Drone
AUD $52.99
- Compact for: Jetson Nano WiFi board NVIDIA Jetson M.2 Network Adapter MSI MPG X570 GAMING EDGE with m.2 slot with wifi bluetooth network card ASROCK X570 motherboard WiFi Bluetooth board with m.2 slot with wifi bluetooth network card asrock Z370 extreme 4 with m.2 slot with wifi bluetooth network card Crosshair VI formula board with m.2 slot with wifi bluetooth network card gigabyte z270n-wifi motherboard Gigabyte GA-X99-UD4 etc
- Upgraded your Routers / Repeater / Range Extender to make the signal be better and longer range, improve range and coverage of wireless signal. 2aded your Desktop PC / Mini ITX Build / PCI Card to make your desktop great increased work performance. 3aded the TX and RX of a FPV UAV Drone for longer range. 4.7dBi high-gain dual-band aerial for indoor use. 5able for all DrayTek Routers and Access Points.
- The cable is 1.13mm mini-coaxial cable (50-ohm antennas and cables.): This is a very thin and flexible cable, with a black jacket. When connecting the U connector to a jack on a miniPCI card or board, often the tight space requires the use of 1.13mm cable, because it is very thin and flexible (diameter is 1.13mm). This very thin cable is typically needed in tight spaces inside of enclosures so that the U connector will snap down on the jack without popping off.
- Our MHF4 to RP-SMA series coaxial cables have medium-sized, threaded coupling connectors designed for use from DC to 11 GHz. MHF4 miniature RF coaxial connector is the smallest mini RF connector in the world. Only 1.2mm low profile, MHF4 IPEX/IPX connector provides good working performance in various application of Wireless LAN.
- With their small size and high operational frequency ranges MHF4 connectors can be used for a variety of Bluetooth and wireless LAN applications in gaming equipment, test points, access points, GPS, notebook computers, and wireless communication devices
In stock
Additional information
| Weight | 0.04 kg |
|---|---|
| brand | TREADALT-TEC |
| dimensions | 23.9 x 6 x 1.3 cm; 40 Grams |