AETERNA HS433-1mini / HS433-2mini / HS433-1, TX433 / HS433-2, TX433 / HS433-4, TX433 compatible handheld transmitter, clone remote control, 4-channel 433.92 MHz fixed code. Top quality copier

‘This is top-quality Clone Remote, which will clone your burner HS433 1mini/HS433 2Mini/HS433, TX433/HS433, TX433/HS433 – 4, TX433 433.92MHz fixed code remote controls. With this remote cloner you can clone all 433.92MHz fixed code key fobs. How to clone your remote, with an easy programming video: •; https://www.youtube.com/watch?v=cysypsmgpxy or https://www.youtube.com/watch?v=ox4fnlxnxpq. Follow these easy steps to program your remote; •; you need to erase the remote first: 1) press and hold button 1 and button 2 together – Led will flash 3 times 2) Keep Holding button 1 and release button 2 3 times, Led will start flashing Non-stop. (it means if you require more detailed information, remote is erased) •; next you need to clone your original remote: 1) put both (Original and) remotes into “Back to Back position (II)” or “side by side. Make sure they have direct contact, touching each other. 2) press and hold 1 button on your original remote and 1 button on your clone remote. Keep Holding until LED will make: 2 blinks – 3 blinks – steady = successfully cloned, only after the light goes into steady. •; if for some reason the Clone does not go further then 2 blinks, it means the signal does not go through, please slide the remote slowly up and down, until you get the point where it will go through. •; Note: You don’t need an access to you control board or receiver. If you want to increase the remote control reception range up to 150 – 200 meters, then you can connect this aerial: https://www.store.co.uk/dp/b01 N1fpwbc. We are totally commit to 100% customer satisf action.