How to use a fish tank air pump? Please read the manual carefully before use and follow the instructions. 1ect the air stone to the hose, and connect the hose to the air outlet of the aquarium air pump. 2k the wet suction cup on the back of the fish tank air pump and fix it on the outer wall of the fish tank/aquarium. Note: The position of the booster pump should be higher than the water surface to avoid reverse flow of the water. 3r checking the fixation, fully immerse the bubble stone connected to the hose into the bottom of the aquarium, the water level of the water tank is not lower than 30cm, and it can work normally after connecting to the power supply. 4 is recommended to ventilate the hose and inhale air before using the air booster pump, and the effect is better when working. Note: 1 booster pump is only suitable for indoor use, please read the manual. 2se ensure that the voltage required by the power supply and the adapter is in line with the required voltage to ensure that the device can work normally. 3 the working environment of the booster pump clean and prevent the connection from being blocked. 4 device is not waterproof, please pay attention to ensure that the product is dry, if you accidentally fall into the water, please cut off the power supply. 5larly check whether the hose is blocked, and the air stone can be replaced regularly to ensure the oxygen-enhancing effect and improve the vitality of the fish. Troubleshooting: a:The fish tank air pump does not work? b:Check whether the power connection is normal, check whether the hose is blocked, and check whether the air stone falls off. a:The output airflow becomes smaller? b:Check whether the working voltage is normal, check whether the air outlet is fully connected, and check whether the hose is damaged. a:The suction cup cannot be fixed on the surface? b:Clean the surface of the aquarium, keep it clean or smooth, clean the surface of the suction cup and fix it again. Contains: 1*Fish tank air pump 1*Hose (100cm) 1*Bubble Stone 1*Suction cup 1*Instruction
Aquarium Air Pump,Fish Tank Air Pump,1.5W Silent Design Air Pump for Fish Tank, Fish Tank Air Pump silent suitable for Small Aquarium / Fish Tank , Oxygen Pump with Air Stone
HKD336.17
- ?【Silent Design】: The aquarium air pump is driven by ceramic sheets and adopts a silent design. Compared with the traditional driven air pump, it is lighter and less noisy. This will be the lowest noise air pump. The working noise of the air pump is lower than 33db, and the work efficiency higher than other traditional booster pumps.
- ?【Small and efficient】: The fish tank air pump is small and light in appearance, and the structure is driven by piezoelectric ceramic plates, without electromagnetic interference and motor drive, with low loss and energy saving.
- ?【Easy to use】: The aquarium air pump is easy to assemble, immerse it in the water by connecting the attached hose and air stone, and adsorb the assembled air pump to the outside of the box, and place the fish tank air pump above the water level to avoid reverse flow of water . When the oxygen pump is working, the minimum water level is not lower than 30cm. Please read the instructions before use.
- ?【Stable output】: The working power of the fish tank air pump is 1.5W, and the average flow rate is 300ml/min, which can steadily increase the oxygen content in the water. The efficient air stone can provide comfortable and uniform bubbles, add interest to the fish, and fully improve the fish vitality.
- ?【Compatible range】: The fish tank air pump is suitable for all kinds of small aquariums and fish tanks below 50L, and can also be replaced with other shapes of air stones (not included). The product includes 100cm hose / air pump / suction cup / air stone. This will be the best air pump partner for the fish.
In stock
Additional information
| Weight | 0.15 kg |
|---|---|
| brand | JRECHIO |
| dimensions | 3 x 1 x 2 cm; 30 Grams |