cription
Attar Factory Automatic Electric Incense Burner for Bakhoor, Frankincense (Lauban), Agarwood, Sandalwood, Incense & More.
DETAILS
Thermostatically controlled electric incense burner that allows you to adjust the heat as desired. Suitable for heating a wide variety of incense.
KEY FEATURES Automatic thermostat Bakelite handle Removable plate for easy cleaning AC 220 -240V Heats to approximately 125 degrees Celsius Safety and quality tested High quality components 3-pin UK plug
INSTRUCTIONS:
1. Place the contents to be heated on the SS plate provided.
2. Turn on the burner by turning the dial to the lowest heat setting. A red light should turn on.
3. Start with the low heat setting to experiment with the heat level.
4. Slowly increase the heat if required (see table for heat suggestions – found on the back of packaging).
5. The heat will automatically stop and start (to avoid overheating) as the burner is thermostat controlled. The red light will constantly turn on and off to indicate when the heat is on and off.
SAFETY INFORMATION: Keep away from children when the burner is turned on. Using the burner on the highest temperature setting for too long will quickly burn most types of incense. Low – medium heat is the suitable temperature for almost all types of incense (see table for heat suggestions – found on the back of packaging). Do NOT touch the plate or the top part of the burner when the burner is turned on. The plate can get extremely hot, especially on higher temperature settings. After the burner has been turned off, do NOT touch the plate or the top part of the burner for at least 30 minutes to 1 hour in order to allow the burner to cool down. Use the handle to move the burner.
Legal Disclaimer
Currently only suitable to use in countries that use AC 220 – 240 voltage (includes most of Europe, Asia, Australia and Africa). May not be suitable for countries that use less than AC 220 voltage (most of North America and Central America). Please wait until our AC 120v burners with fitted USA plugs are available (mid October 2020).