AURSINC MMDVM Hotspot Board + Antenna + OLED Display Support UHF C4FM YSF NXDN DSTAR P25 DMR Fully Assembled and Tested

12,118

  • Make sure this fits by entering your model number.
  • SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF.
  • EASY CONFIGURATION: Preload the Pi-Star sofeware on the TF card, no need to download it again. Radio Frequency: (UHF: 430-440) This is an updated version, no need to configure RXOFFSET and TXOFFSET are 0 by default.
  • SSID WIFI: Requires 2.4GHz SSID as the Pi Zero W is not compatible with 5.8GHz. And WiFi will not work with WEP, make sure your WiFi password type is WPA. Turn on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the hotspot to your router. After turning on 2 minutes, go to http: //pi-star/admin/configure
  • EASY TO CHARGE: Free micro USB charging cable included, charged with a power bank or connected to a laptop or computer. The Hotspot will also work mobile in your vehicle if you connect it to your mobile phone’s network.
  • NOTE: Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc. UV series, BF series. More product configuration guide, read the product manual or contact us, we will reply you within 24 hours.

In stock

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Product description: MMDVM Hotspot is an easy, convenient and ready to use multimode access point that supports C4FM YSF NXDN DSTAR P25 DMR Product description: MMDVM Hotspot is an easy, convenient and ready to use hotspot that supports C4FM YSF NXDN DSTAR P25 DMR
Base Fit: Turn on and wait 2-3 minutes, Connect to Pi-Star-Setup(pi-star)/SSID/PASSWORD: raspberry http://192.168.50.1/admin/configure
MMDVMHost Configuration MMDVM Display Type: OLED Radio Freq: UHF: 430-440 Radio type: STM32-DVM/MMDVM_HS – Raspberry Pi Hat(GPIO) or any XXX(GPIO) http://192.168.50.1/admin/expert/edit_mmdvmhost RXOFFSET=0,TXOFFSET=0 (default) TIPS:OLED is on display Until you set wifi and display TYPE
Login information: User: pi-star Contrase:raspberry Software: Pi-Star Set the same frequency, call indicative, DMR ID, color code, repeater (Time Slot Defaults 2) such as Radio Mobile and WiFi. Note: All designs will be contributed to the open source MMDVM project.
Package Content: 1 x OLED display (installed on board) 1 x TF card 1 x MMDVM_HS (UHF + VHF) 1 x USB cable. 1 x Antenna (with 90 degree elbow).

Additional information

Weight 0.01 kg
brand

Brand: AURSINC

dimensions