Specification:
Size: 40x4x0.9cm
LED Chip: 3pcs
Voltage: DC 5V
Induction Angle: 120°
Sensitive Range: 3 Meters
Sensitive Time: 25 Seconds
Charging Time: 3-5 hours
Material: Aluminium Alloy+PC
Working Mode: All-day sensor mode (light up when it senses someone), Night sensing mode (in the case of insufficient light, the induction of talent will automatically light up), Always on mode: (cabinet light always on)
Working Time: Long Light–5 hours/Auto Induction–90 days
Light Color: White light, Warm light, Natural light
Package Contents:
1 x Indoor Motion Sensor Light Bar
2 x Iron Sheet with 3M adhesive
1 x Manual
1 x Type-C USB cable
Q: How to install?
A: 1. Please clean the installation position and keep it dry.
2 Place the iron sheet on the back of the light finding out the position of the built-in magnet.
3 Stick it to the target position.
4. After installation, the light is magnetically attach on the iron sheet and can be take off at any time.
Q: How can I use it?
A: The initial state is off; press the first time to enter the constant light mode; (in the continuous light mode, the sensing function does not take effect and will not automatically turn off)
Press the second time to enter the night sensing mode; (the light body flashes 3 times to prompt, and then enters the night sensing mode after flashing)
Press the third time to enter the daytime induction mode; (the light body flashes 2 times to prompt, and then enters the daytime induction mode after flashing)
Press the 4th time to return to the off state, and so on
Q: How do adjust the 3 modes of light of LED lights?
A: Short press: cycle through white light, warm light, neutral light
Long press: When the light is on, press and hold the button to turn on the brightness adjustment and release the button to lock the brightness. (with brightness memory function)
Q: I just received the light, why won’t it turn on when I turn it on?
A: Please fully charge the battery before using it for the first time, otherwise, the light may not turn on due to the protection of the circuit. (The protection is automatically released after charging)
Q: Why is there no sensing function?
A: 1. Please make sure that the induction mode is turned on (press the gear that flashes three times to enter the night induction mode, presses the gear that flashes twice to enter the all-day induction mode, and automatically enter the human body induction mode after the flashing, please do not press again during this period. button);
2. In [Dark Night Sensing Mode], under the condition of sufficient light, the light will not turn on when it senses a person. It will automatically turn on only when the light is insufficient and a person is sensed. Please take the light Test the night sensing function in a dark area;
3. The installation position is too low, too high, too deep, or there are obstructions near the sensing probe, which will affect the sensing range. To ensure the sensing effect, it is recommended to install the sensing probe in a suitable location and keep the sensing probe close to people. The side that passes through;
4. The glass can block the human body’s induction.
Q: How do I know if it is fully charged?
A: The red light means charging, the green light means it is fully charged.