BETAFPV ExpressLRS OpenTX Mini Nano Receiver High Refresh Rate Long Range Performance for FPV Racing Drone Specification Note: The firmware version of the Nano receiver and module manufactured by our company is ELRS 1.0.0-RC5 (the fifth test version before release); The ELRS Innovative team has officially released version 1.0.0. Based on the version, we have some updates: Nano TX Module supports 500Hz refresh rate； Short press the button on the Nano module 3 times to get into the binding status. We suggest our customers upgrade their modules and receivers’ ELRS version to 1.0.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully. ● Weight: 0.7g (receiver only) ● Size: 12mm*19mm ● Telemetry power: 20dbm ● Frequency bands (Nano receiver version): ISM● Input voltage: 5V ● Antenna connector: IPEX MHF Package ● 1 * BETAFPV ELRS Nano receiver ● 1 * BETAFPV T antenna ● 2 * Spare shrink tube ● 4 * 30awg silicon connection wires (1 black, 1 red, 1 white, 1 yellow) ● 1 * pin header 1×4 ● 1 * Nano receiver user manual
BETAFPV ExpressLRS OpenTX Mini Nano Receiver High Refresh Rate Long Range Performance for FPV Racing Drone
£56.99
- 【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
- 【ExpressLRS Receiver】BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications which aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module or Nano bay, etc.
- 【Crossfire Serial Protocol 】ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. How to set up the CRSF protocol can be viewed on the fourth page of the manual.
- 【Nano Size】This receiver only has 0.7 grams and the volume is 12mm*19mm which is very suitable for Tiny whoop because of the ultra light and Nano size.
- 【Configuration & Bind】Nano receiver could enter binding status by power on/off three times.
In stock
Additional information
| Weight | 0.012 kg |
|---|---|
| brand | BETAFPV |
| dimensions | 10 x 7 x 1 cm; 12 Grams |