Spec:
Item Type: Animal Tag Reader
Material: ABS
Operating Frequency: 134.2KHz
Data Storage: Store 128 groups of data
Charging Method: USB
Charging Voltage: 5V
Screen Display: Organic Light Emitting Diode display
Continuous Work: 4 hours
Reading Standard: for ISO11784, for 85 FDX B, for EMID
Buzzer: Built in
Operating Language: English
Power Supply: 3.7V rechargeable lithium battery 800mah (shipped with built in battery) 90 minutes full
Read Distance: Approx. 15cm / 5.9in
How to Use:
1. Power on and Card Reading:
Press the power button to turn on the scanner and enter the scanning tag interface.
2. Scanning Tags:
Tags of for FDX B and for EMID types can be scanned within the sensing area. If no tag is detected, it will prompt No tag found.
3. Charging and Data Upload:
The device can be charged and data can be uploaded via USB connection.
When the USB cable is connected, the USB symbol will appear in the upper left corner of the screen, indicating the charging status.
To upload the data stored in the device, press and hold the button for 3 seconds. The device can store up to 128 data entries. After successful data upload, the interface will display as follows.
PackageList:
1 x Animal Scanner
1 x Data Cable