BIGTREETECH TFT35 E3 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for Ender 3/CR10 3D Printer

Firmware Introduction 1. Ways to obtain the firmware of motherboard 2,Get it from customer service or technical staff； Log in the open source website of our company to download ： https://github/bigtreetech
Firmware update Firmware file name: BIGTREE_TFT35_V3.0. ( version number) First copy the above firmware to SD root directory, and then insert the card into the SD card slot of the board. Next please re-power the board or press the reset key, and wait for about 10 seconds before the update is completed. 3. For DIY board firmware, please refer to the file TFT35-E3 V3.0PIN.
Something Important 1. When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode. 2. When using serial port screen mode, connect with TFT or AUX-1 on the motherboard via RS232. This mode has touch function. 3. Two work modes can be changed by one key. Press the encoder about 3 seconds until the mode selection page appears, then press the encoder after selecting the mode.
Product Specification Appearance size：93*87mm Installation size：Perfectly replace the original LCD screen of Ender3 printer, detail information please check TFT35-E3 V3.0 SIZE Microprocessor：STM32F207VCT6 Power Input：DC 5V SD card logic voltage：3.3V and 5V（Such as: support MEGA2560 main control chip motherboard, higher compatibility)
Package Included TFT35 E3 V3.0*1