Package Include:
4x cloner remote controls
Product manual
Parameter:
– RF frequency: 433MHz
– battery: 1x 27A 12V (included)
– Button: 4 Keys
– transmitter range: Open space is more than 30 meters
Please confirm three conditions before purchasing.
1: The original remote control works normally.
2: The frequency: 433.92Mhz.
3: The chip Code (Encoder Chip) as listed below
2260,2262,1527(EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527)PT2264, PT2240(LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003
Note: Rolling code remotes will not work!!!
Memory Clearance:
Press the button A and the button B at the same time, the LED flashes 3 times.
Release button B (Keep pressing button A), and press button B slowly for
3 times, the LED flashes quickly, and all information is cleared.
One key copy:
(1)to copy the buttons one by one. （except Codiplug type)
(2)Copy face to face, press and hold the button of the original remote control, the LED of the copy remote control flashes 3 times and then stays on, which means that the code has been copied successfully.
(3)Other buttons are the same as the above button copy method.
Copy four keys together:
Close together
<10mm
For most rolling code.
(1) Press and hold the first button of the copy remote control, after the LED flashes twice , short press the second button three times, the LED flashes three times. Enter the four-button continuous copy mode.
(2) copy face to face, press and hold the button of the original remote control, the LED of the copy remote control flashes 3 times, which means that the current code has been copied successfully.
Special BFT copy (MITT02/MITT04) method: for BFT only
(1) Hold the first button of the copy remote control, the LED flashes twice, and press the second button once to enter the copy BFT brand remote control mode. (After the seed copy is successful, short press the second button twice again, the LED flashes 3 times, and enter the BFT continuous copy 4 button mode)
(2) Press the front two buttons of the BFT at the same time, the copy remote control LED flashes twice, and the seed copy is successful. Release the BFT brand remote control button, press any button of the BFT remote control, the copy remote control LED flashes 3 times and then stays on, which means that the code has been successfully copied.
BFT seed sending:
Press the first button and the fourth button of the copy remote control at the same time, the copy remote control sends BFT seeds.
CODIPLUG NOV2 & UNIK copy method:
（1)Copy 1st button and 2nd button : Keep holding the first top button (1st button) of D4 remote control, when LED flashes twice and goes out, then press the 2nd button twice, still holding 1st button and press any button of CODIPLUG, when LED of D4 f lashes 3 times and stays on, it means D4 has copied CODIPLUG remote control well. Please note that at this moment the 2 buttons of CODIPLUG have been copied by this step. （2)Copy 3rd button and 4th button: Keep holding the 3rd button of D4, when LED f lashes twice and goes out, press the 4th button of D4 twice, still holding the 3rd button and press any button of a new CODIPLUG remote control, when LED of D4 f lashes 3 times and stays on, it means D4 has copied this new CODIPLUG remote control completely