BW® 40M / 132FT Feet BNC Video Power Cable For CCTV Camera DVR Security System (40M) – Enhanced Array Camera Dedicated: Cable type: 0.75mm², Cable OD: 4.7mm

Black BNC Video Power Cable Easy to install and can be linked to DVR Machine, VCR, DVD Recorder, TV, Capture Card, Multiplexer etc All you have to do is plug this into your CCTV camera with the BNC and power and run to your DVR / Recording device and plug them in, put the red cable into the power adapter (available in our shop) into your socket behind your DVR. Some Cameras may require a BNC to phono adapters (available in our shop) We recommend that you run the power through the cable to the camera to prevent ‘Ground Looping’ Tips : Ground Looping: This is an inset from a search engine result for ‘Ground Looping’ In CCTV, ground loops can be seen as hum bars (bands of slightly different brightness) scrolling vertically up the screen. Low current wiring is particularly susceptible to ground loops. If two pieces of audio equipment are plugged into different power outlets, there will often be a difference in their respective ground potentials. If a signal is passed from one to the other via a video connection with the ground wire intact, this potential difference causes a spurious current through the cables, creating an video buzz at the AC mains base frequency (50 or 60 Hz) and the harmonics thereof (120 Hz, 240 Hz, and so on), called mains hum. Specifications: 2 in 1 Video/Power Cable with – Video Connection : BNC composite video (yellow) DC Power Connection: (red) 1 x 2.1mm x 5.5mm x 10mm Male Plug 1 x 2.1mm x 5.5mm x 10mm Female Socket (Centre Positive) Length: 5 Meters (16.4 Feet) 10 Meters (32.8 Feet) 15 Meters (49.2 Feet) 20 Meters (65.6 Feet) 30 Meters (98.4 Feet) 40 Meters (132 Feet) 50 Meters (164.0 Feet) Package included: 1x 40M/132Feet BNC Video Power Cable