16Ft( 5M) car door edge guard Installation Steps: *Clean the door edge to remove any oil, wax & dust. Make sure the door is dry before continuing. *Uncover the tape from the tip of the lining (Ensure the tape is install INSIDE the door) and peel the red strip off the tape by approximately 2 inches. *Start from the top, insert the lining onto your door edge until the lining is fully seated. *Press the lining with your thumb along the door edge until it is fully seated, then pull the red strip off. *Repeat step 4 until all edges are protected. *Use scissors to cut away unused lining for other door edges. *Let the lining dry up by itself and do not get wet for at least 12 hours.
16Ft( 5M) Rubber Seal Protector Attentions : Our Door Edge Protected Lining works best for door edge thickness up to 2mm ( .078″). Attention to truck/van/jeep owners, please ensure your door edge thickness prior to purchase you’re not sure about comparability / fitment, please leave a message to us, we will answer your question through the customer service in time.
5M Rubber Edge Trim Installation length advice: Car: 5M: vertical installation of 4 doors of a car. 10M: the vertical side of the four doors of a car + the horizontal side of the bottom The installation. 15M: the vertical side of the four doors of a car plus the horizontal side of the bottom Install the bottom side of the trunk. Suvs : 5M: 4 doors of a car. 10M: 4 doors + trunk installation for a car. 15M: the four doors of a car + trunk + hood The installation.
16Ft( 5M) Car Door Edge Protector Package List: 1*Car Door Edge Protector
Car Door Edge Protector,16Ft(5M) Car Edge Trim Rubber Seal Protector with U Shape Car Protection Door Edge Guard Fit for Most Car
HKD296.14
- Rubber Seal Protector : High quality TPO rubber material, heat resistance, abrasion resistance, anti-aging, waterproof & UV resistance.
- Car Door Edge Guards: 3 colors (White, Black & Red) to select to match your vehicle color, almost invincible after installation.
- Car Edge Trim Rubber Seal Protector :Thin/Slim design yet it efficiently protects your door. “ATTENTION! – NOT SUITABLE FOR DOOR THICKNESS MORE THAN 2mm ( .078 INCH)”. ADHESIVE: Built-in strong double-sided adhesive tape and does not melt under hot weather, no glue needed. The adhesive tape is designed to paste on the inside door edge, therefore it will not leave any residue on the outside door after the door trim is removed.
- Easy to Install: Direct replacement. Just push on the rubber seal above the install placention to truck/van owners, please ensure your door edge thickness prior to purchase.
- 【PLEASE NOTE】:Place the car door edge protector under the sun for about 3-5 minutes (This step make the car door protectors edge guards more flexible)k and easy no-drill installation with the use of self-adhering 3M Tape, Decorate car appearances, make your car particular and unique.
In stock
Additional information
| Weight | 0.222 kg |
|---|---|
| brand | DOS |
| dimensions | 17.8 x 13.2 x 1.8 cm |