CD Aux Cord Adapter 3-Pin Wirelesso Goldwing Bluetooth Adapter Cable Stereo Music Changer Connector Fit for GL1800 Goldwing

Specification:Item Type: Bluetooth Audio CableMaterial: ABSBluetooth Version: 5.0Product Voltage: 5-12vApplicable Models: Fit for Honda Gl1800 GoldwingInstallation Guide:2.1 Installation Preparation1. This product operates on a vehicle with 12 volt or 5 volt DC negative ground system. Do not use it on other voltage system.2. This product only fits OEM or aftermarket car stereo with CD changer port and different solutions of Bluetooth adapter would be adopted according to different brands of vehicles or different car radios.2.2 Installation Steps:1. Turn off car engine and remove key from ignition, if car radio uses a security codes, make sure that you have the codes before unplugging the radio.2. Unmount the radio from the dash in order to get access to the back side of the radio, and find CD Changer port at the back of the radio. For details of unmount, please refer to car user manual or car stereo manual.3. Connect wire harness to car stereo radio module unit in advance. Be sure to make a firm connection. Then attach the wire harness connector to the back of stereo to the CD changer port.4. For some car models, connect the red wire to B+/Ub+/12V ACC port (different car stereos has different names. such as: BAT, Bup+,B-U,MEM +12, KL.30) or other correct ACC power or 5 / 12V battery power. Connect the black wire to GND port of head unit power module unit.2.3 Important Installation Notes1. As to some vehicles with external CD Changer, which occupies original CD changer port, Parallel Harness is needed to keep the use of original CD changer. 2. As for factory radio of mini ISO 8 pin, its CDC connector is 20-pin block connector, in order to install our Bluetooth kit, it requires to cut the 8-pin part or connect with special 20-pin adapter cableage List:1 x Bluetooth Audio Cable