Step 1: Open a 52mm diameter circular hole in your middle controller or other pre-installed position
Step 2: Insert the instrument into the open round hole
Step 3: Correspond the screw hole of the bracket with the screw on the back of the instrument, then tighten it with the screw and clamp the plate with the bracket and the clock frame Step 4: Plug the power harness directly into the rear terminal of the instrument, and then connect the corresponding sensor and harness according to the power supply connection distribution instructions
Wiring method: The red wiring is connected to the positive electrode of the power supply, the orange wiring is connected to the backlight, and the blue wiring is connected to the negative electrode of the power supply
Specification:
Item Type: Sonar
Material: 316L stainless steel, anti-fog lens, ABS
Mounting Hole Diameter: Approx. Φ52mm/2in
Depth display range: 0-100m/0 328FT
Backlight Color: White
Working voltage: DC 12V
Instantaneous voltage: DC 9 32V, up to 36V
Operating Current: 60mA Operating temperature: 30 °C + 75 °C
Storage temperature: 40 °C + 85 °C
Dial Waterproof: IP67
Back cover waterproof: IP5
Package List:
1 x Depth Sounder1 x Transducer (with 10m cable)
2x Screw 1 x Power Cord 1x Manual