Q3RF Digital Wireless Thermostat with Receiver Box
The Digital Wireless Thermostat consists of two units: the portable thermostat and the receiver, which controls the boiler. The two tools have previously been paired and connect with each other through a radio frequency network. The effective range between the two units is 50m, which diminishes in presence of obstacles. The wall thermostat is easily connectable to any boiler or air conditioning system which have a double wire connector for a room thermostat and it works with both 24V and 240V circuit. The thermostat switches the appliances on and off below the adjusted temperature, thus reducing energy costs and maintaining comfort. It is possible to switch from heating to cooling mode to reach the desired room temperature.
COMPUTHERM – Feeling at home
Switching voltage: 24 V AC/DC – 250 V AC, 50 Hz
» Temperature Measurement Range: 3 to 45°C (in 0.1°C increments)
» Temperature Measurement Accuracy: ±0.5°C
» Battery powered (2 x AA LR6 Alkaline batteries – not included)
» Thermostat dimensions: 110 x 80 x 22mm
» Important warning: Radiator valves with thermostatic heads must be set to the maximum temperature or to the thermostatic head of the radiator valve and replaced with a manual regulator. When configuring the connections, it is necessary to pay attention to the load capacity of the receiver and to observe the instructions of the manufacturer of the devices.
» Transmission range between the devices (without obstacles): circa 50m
» The instructions for all products are available on the website of the manufacturer under the tab “Manuals” (www .manuals.calorsol. de) in 6 different languages.
COMPUTHERM thermostats bring comfort and well-being to your home. Whether cooling or heating, mechanical or smart thermostats – COMPUTHERM offers the right solution for every need.