Concrete Moulds Paving Square Path Mould Concrete Garden Paving Moulds 8 Grid DIY Driveway Brick Patio Concrete Slab Path Walk Maker Mould 40 x 40cm/15.75 x 15.75 inch

The paving pavement mold is made of premium plastic and can be reused after cleaning. Geometric pattern adds sense of fashion and art.Widely used for home,wedding, party, restaurant, hotel, shopping center, pub.
Specifications:
Condition: 100% Brand New
Material: PP Resin
Color: Black
Size: 40 x 40cm / 15.75 x 15.75 inch (appr.)
Package Included:
1 x Paving Pavement Mold
How to use this Concrete Paver Mold to build the pathways:
Step 1:
Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.
Step 2:
Fill the paver mold, scooping the concrete in with a shovel and making sure to fill each area.
Step 3:
Using rubber gloves, spread the concrete around the mold, filling in any gaps or low points. Tap the mold with your hand to eliminate any air bubbles.
Step 4:
Following the contours of the mold, smooth out the concrete, wiping away any excess.
Step 5:
Allow the concrete to set for a maximum of five minutes, then carefully remove the mold. For the next stretch, rotate the mold a quarter-turn and place it beside the paver just completed, angling slightly if you’re creating a curving pathway.
Step 6:
After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle
Note:
1. Please allow 0~1inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.