This is a timer delay trigger module with LED display. The module has 5-36V wide voltage. At room temperature, its operating current is up to 15A, power up to 400W, so it can be used for most equipment. Besides, you can set different OP, CL, LOP parameters, and these parameters were independent of each other and saved respectively. Even when there is a power failure, all set parameters can be automatically savedifications: Voltage: DC 5V~36V. Trigger Signal Source: High voltage level trigger (3.0V~24V), signal ground and system ground are not on common ground to improve the system’s anti-jamming capability (you can also connect them on common ground). Output Capacity: DC 5V~36V, at room temperature, continuous current is 15A, power 400W. With enhanced heat dissipation, the current can be up to 30A. Quiescent Current: 20mA Operating Current: 50mA Working Temperature: -40℃~85℃ Clocking (Time Delay) Range: 0.1seconds to 999minutes Size: 60×34×12mm / 2.36×1.33×0.47″ Package Includes: 1×Timer Switch ModuleNote: 1. The module is an active output, the output voltage equal to the input voltage. 2.’DC + ‘and’ load + ‘ are internally shorted(connected), but’ DC- ‘and’ load – ‘ cannot be shorted, otherwise the load cannot be controlled on and off, which is equivalent to load being powered on always.
DC 5-36V Digital LED Relay Board Dual-MOS Trigger Cycle Timing Circuit Switch Timer Delay Module
CAD $28.99
- DC 5-36V wide voltage input, suitable for controlling DC motors, lights, LED strips, micro-pumps and solenoid valves
- Dual-MOS in parallel active output, lower inner resistance and stronger power, can be used for most equipment, professional and practical
- Emergency stop function (“STOP” button) and reverse input protection, safe for use
- After five minutes without any operation, the digital display automatically turns off, and you can press any button to wake it up
- No noise, no spark, no electromagnetic interference, easy to use
In stock