ons:
Material: PC plastic
Input: 2 sets of photovoltaic connectors
Output: 1 set of output ports
Rated maximum voltage: 500V
Maximum DC short circuit current: 15A per input ISC
Maximum current output: 32A
Protection level: IP65
Electrical box size (l*w*h): 215*250*100mm
Cable input specification: 14AWG/12AWG/10AWG can be used
Output cable specification: 14AWG/12AWG/10AWG can be used
DC circuit breaker model: LQL7
Rated insulation voltage (UI): 500V
Rated current (LE): 32A
DC surge ARRESTER: LD-40
Maximum operating voltage (UCPV): 500V
Maximum discharge current: 40KA
DC fuse holder LQPV: 1000VDC
Rated working voltage: 500V
Fuse link 10*38mm: 15A
Operating temperature: -20°C to +65°C
Installation and precautions:
1. Regularly check the high-voltage fuse to prevent the solar panel from disconnecting after the high-voltage fuse is blown.
2. The input and output of PV cannot be reversed, otherwise it may cause the equipment to fail to work, or even damage other equipment.
3. When testing or waiting for this device, please note that the input and output ports may be live, please avoid electric shock or damage to other devices.
4. Check the lightning protection module after lightning. If the error light on the control panel turns red, replace it in time.
How to use:
Connect the positive and negative poles of the solar panel to the input port of the device, connect the circuit breaker to the inverter or controller, set the circuit breaker switch to ON, and the device connection is complete.
Packing List:
PV combiner box*1
Plastic expansion*4
Mounting screw*4
30A connector*2
Special wrench*1
Ground wire 1m*1
Manual*1