DIGITEN Water Flow Control Meter LCD Display Controller+G1/2″ Water Hall Sensor Flow Meter Flowmeter Counter 1-30L/min+G1/2″ Solenoid Valve Normally Closed N/C+DC 12V Power Adapter

TECHNICAL SPECIFICATIONSFor DFC15 Controller:Controller Power Requirement: 12VDCPower Adapter: Input: 100-240VAC; Output: 12VDC, max 2A Adapter lead length: 1m Measuring Accuracy: ±1%Output for Solenoid valve: 12VDC, max 5A Temperature Sensor: 0-125℃/32-257℉, NTC3950, Accuracy: ±1℃/±1℉ thread: M8Max Total Volume : 999999 G/L Quantitative Range: 0-9999.99 G/L Flow Rate Range: 0-9999.99/LPM(GPM) Cable Length : 1m Dimensions: 88mmx126mmx30mm Weight: 200g Operation Environment: Temperature: 0-50℃/32-122℉; Relative Humidity: For G1/2″ Flow Sensor:Flow range:1-30L/minAllow compression:Water pressure 1.75 Mpa belowSensor:Hall effectCable length:15cmr: ± 2% For G1/2″ Solenoid Valve:Working pressure:0.02-0.8MpaOperation mode:N/C,normally closed to work: 1. Set K value, quantitative value, max alarm value, properly install the flow sensor and solenoid valve.2. Press the RUN/STOP button, the controller works, total will continuously display the current flow volume, and current flow rate, and the faucet will start animated display.3. When the flow reaches the quantitative setting value, the controller turn off the solenoid valve automatically, and the total value stop, faucet animation will be stopped dropping, flow rate back to zero.4. Pressthe RUN/STOP buton again and the controller will repeat the same job:1, This controller work with the solenoid valve up to 5A, but this kit come with 2A power adapter. If drive a large solenoid valve, please use suitable power adapter.2, Ensure the solenoid valve and flow sensor direction is the same with water flow.3, Avoid the water into the controllerage includes:1 x DFC15 controller 1 x G1/2″ flow sensor1 x G1/2″ solenoid valve1 x Power adapter1 x Temperature sensor 1 x Manual