Designed to solve the problem of filling capsules, e.g. small batch processing, production, home-made capsules. It is applicable for small factory, pharmacy, sample room, laboratory, pharmaceutical preparation department in hospital, family and so on. It includes alignment plate, force press plate, body plate, middle plate, cap plate, power distributor and handle.
Specification:
Condition: 100% Brand New
Item type: capsule filler.
Product material: plastic.
Colour: green.
Hole quantity: 100.
Suitable for capsule type: 00 #
Width of alignment plate: approx. 15.7 cm.
Package weight: approx. 800 g.
Box contents:
1 x alignment plate.
1 x body plate.
1 x middle plate.
1 x cover plate.
1 x powder press plate.
1 x power spreader.
1 x handle.
Operating steps:
1. Charge the capsule body and lay the body plate flat.
2. Place the frame of the arrangement plate on the body plate.
3. Add approx. 100 capsules in the frame.
4. Pick up the plate body and the arranged wheel that swings around.
5. The capsule body falls one by one into the plate hole and then pours out the additional capsule body.
6. Take the wheel arrangement plate and put the capsule body installed on the board.
7. Filling power in capsule body.
8. Scratch the board back and forth on the body when the capsule body is full of powder.
9. Use a powder press plate that fills the capsules and fills the capsules.
10. Excess powder of the scratching plate.
11. Turn the cover plate and middle plate over to cover the body plate.
12. Lock the capsule body and capsule cap.
Note:
The capsules in the pictures are not included.