Feature:This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. 3.3V – 5V logic levels (a rarity), and can process multiple different formats by setting two pins to high or low. The DAC will process data immediately, and give you a clear, analog, stereo line level output. It’s even cool with MCLK-less I2S interfaces such as the Raspberry Pi (which it’s ideal for) – a built in PLL will generate the proper clock from the incoming signal. For inputs, you can use classic I2S (the default) or 16-bit, 20-bit or 24-bit left justified data. You can set it up to take an input system/master clock but we default-set it to just generate it for you, so you only need to connect Data In, Word Select (Left/Right Clock) and Bit Clock lines.If you want, there’s a mute pin and a de-emphasis filter you can turn on.Package Contents:1Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
DLOETT UDA1334A DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board For Arduino 3.3V – 5V
£20.99
- It’s even cool with MCLK-less I2S interfaces such as the Raspberry Pi (which it’s ideal for) – a built in PLL will generate the proper clock from the incoming signal.
- 3.3V – 5V logic levels (a rarity), and can process multiple different formats by setting two pins to high or low.
- The DAC will process data immediately, and give you a clear, analog, stereo line level output.
- This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface.
- For inputs, you can use classic I2S (the default) or 16-bit, 20-bit or 24-bit left justified data.
In stock
Additional information
| Weight | 0.2 kg |
|---|---|
| Brand | SilteD |
| EAN | 9341652094810 |