Drive Alive Charcoal Concrete Block Paving Colour Enhancer & Sealer 1 x 4 Ltrs

A ready‐to‐use, coloured solution for use on concrete, block paving and paving slabs.
Designed to enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. Bond-It Colour Enhancer will enhance present colour and extend the lifespan of the treated surface.
Restores colour.
Protects from water penetration; staining and dirt/grime build‐up.
Advanced “Hybrid” technology.
Ready to use.
Excellent abrasion and chemical resistance.
Contains fungicide which inhibits organic growth.
Solvent‐free ‐ low odour.
Facilitates easy cleaning.
Improves water and UV resistance.
Coverage: One 4 litre container will cover approximately 25m2 depending on surface porosity for a single coat.
Uses: Designed to enhance coloured concrete and block paving, protect from water penetration, oil or grease spillages and dirt/grime build-up. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles.
How to use Bond-It Colour Enhancer
Stir well before use and periodically during application.
A test on a small inconspicuous area is recommended to determine the depth of colour required.
Apply using a brush or roller.
Do not over apply or allow puddling.
This product will dry in 1 to 2 hours on a dry sunny day; however, cold or humid conditions will slow drying times.
Do not traffic for 3-4 hours after application