This FT232 USB to TTL adapter with two isolation chips allows both signal and power to be isolated. Even when your external circuit is shorted or a large voltage is applied, it will not damage your USB port and thus protect your computer. This USB to TTL UART isolation module can handle a variety of complex and harsh conditionsautions: This isolated USB to TTL adapter does not have 2 pins for RTS and CTS. So if you need to use these 2 pins, please do not buy this adapterification: Model: SH-U09C3 Main chip: FTDI FT232RL Isolation voltage: 1500VDC voltage isolation, with continuous short circuit protection Pin Definition: RXD,TXD,GND,VCC,P30(P30 is only for STC MCU) TTL Level: 3.3V or 5V USB interface: 2.0 The maximum speed: 3Mbps About indicator LED: PWM LED:Power Indicator RXD LED:The data transmission indicator flashes when there is data from the USB port. TXD LED:The data receiving indicator flashes when the USB port receives data of supported systems 1,Windows XP,7,8,10 2,Ubuntu 11.10, kernel 3.0.0-19 or above 3,Mac OS X 10.3 to 10.8 (32 &64 bit) 4,Mac OS X 10.9 and above(64 bit) 5,Windows CE 4.2-5.2 6.0/7.0 and Windows CE 2013 You can download the driver directly from FTDI’s websiteWorks with software HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etcing list: 1 X Isolated USB to TTL Adapter 1 X User Manual 1 X 4 PIN DuPont CableWARRANTY: DSD TECH offers a 1-year warranty and lifetime technical support for this isolated USB-to-TTL adapter。If you meet any question, Please contact us, We will fix your issue within 24 hours.
DSD TECH SH-U09C3 Isolated USB to TTL Adapter Featuring FTDI FT232RL IC
¥7,693
- Make sure this fits by entering your model number.
- Industrial-grade USB isolation module: ADI’s iCoupler signal isolation technology is used to fully protect the computer’s USB port from external short-circuit, shock and other damage.
- The main chip is FT232RL from FTDI ,High stability. LED indicator for TX,RX,Power,It is very useful when you are debugging or downloading.
- Protective case: We have installed a protective case for this isolated USB to TTL Converter, which prevents your hands from directly touching the PCB and IC.
- Both 3.3V and 5V Logic TTL are supported. You can switch by jumper.
- DSD TECH offers a 1-year warranty and lifetime technical support for this isolated USB-to-TTL adapter you meet any question, Please contact us, We will fix your issue within 24 hours.
In stock
Additional information
| Weight | 0.04 kg |
|---|---|
| brand | DSD TECH |
| dimensions | 4.95 x 1.14 x 0.25 cm; 8.5 Grams |