The Duronic TVB420 is a solid TV bracket that will fit all of the major TV brands on the market. Our TV brackets are made of strong cold steel to give the best heavy duty results that customers look for. This Duronic model has an articulating cantilever so your TV position can be adjusted to your desired visual preference. Once installed flat the shortest distance of the TV and the wall is 5cm and the furthest extended distance is 42cm.
Make sure this bracket is designed for your TV by checking the following:
Your TV should be a size between 17″ and 56″
and
Have a VESA of MAX 400 x 400. This is the horizontal distance between the holes at the back of your TV x the Vertical distance of the holes at the back of your TV in millimetres.
Our brackets include a manual for you to easily follow and install the bracket. It comes with all the screws for fittings that fit 99% of TV’s. All you need is a drill, a long screwdriver, and a helper to get the TV up on the wall.
Once the TV is mounted you can adjust the tilt level/Swivel you easily by moving the TV into the correct position. You can have up to + 9 or -15 degrees tilt or 180 degrees swivel for an enhanced viewing angle if the TV is mounted at a height.
You can’t go wrong with the Duronic TVB420, its strong, cost effective and does a really good job.
Box Contains
Duronic TVB420 Adjustable Bracket.
Fitting Kit including nuts and bolts for secure wall mounting.
Instruction Manual to guide you through an easy step by step fitting process.
Duronic TV Bracket TVB420 | Cantilever Wall Mount for 17”-56” Television Screen | Tilt +9°/-15° | Swivel 180°/360° | VESA Up to 400x400mm | Fixing for Flat Screen LCD/LED/OLED/QLED | Strong Heavy Duty
$62.99
- Make sure this fits by entering your model number.
- The Duronic TVB420 TV wall Mountable Bracket Fits TV size 17″-56″ subject to a VESA Maximum of 400mm X 400mm. VESA 400 means the distance between the horizontal and vertical holes at the back of your TV can be a maximum of 400mm. This bracket can also hold a TV with a combination on the following VESA’s 75 100 150 200 300 400
- The Duronic TV Bracket is perfect for TV size 17″-56″. Tilt up/down +9 and -15 features for optimum viewing angles. It is made from high quality wall mount Bracket made from cold steel sheet. Fashionable Black, Electrostatic power coating for durability; All fittings such as screws and bolts are included for easy installation; Big square cut on the back plate for easy cable management.
- This bracket is Universal with all flat panel TV / Monitor with VESA mounting-hole pattern within 400x400mm (HxV) including those compatible with VESA 200×200, VESA 400×200, VESA 100×100, VESA 100×200, VESA 75×75, VESA 75x100and VESA 400×400. Slim, TV only ~50mm from wall; Overall dimensions: 400×400 mm; Supported Max. Wall plate size: 5.5cm X 25cm.
- Please measure the height and width of TV and make sure it’s bigger than the bracket size. Load capacity on this bracket is a good 25kg. Most TV’s are around 10-25KG, so please check your TV’s weight beforehand. Once the TV bracket is flat against the wall the minimum distance between the wall and TV will be approximately 5cm and the maximum distance it can achieve when arms are extended is 50cm.
- Our brackets include a manual for you to easily follow and install the bracket. It comes with all the screws for fittings that fit 99% of TV’s. All you need is a drill, a long screwdriver, and a helper to get the TV up on the wall. You can’t go wrong with the Duronic TV bracket, its strong, cost effective and does a really good job.
In stock
Additional information
| Weight | 3.24 kg |
|---|---|
| brand | Duronic |
| dimensions | 7 x 30 x 26.5 cm |