ELEGOO 3D Printer Resin 1000g White, Standard 405nm Rapid UV Resin Fast-Curing Photopolymer Resin for LCD/DLP 3D Printer

ELEGOO STANDARD RAPID UV RESIN FOR LCD 3D PRINTER Provide a stronger level of hardness, better resolution, and a great surface finish for 3D printed parts and modelsYour Brilliant Go-to Resin – Works well on most LCD 3d printer not only for ELEGOO Mars/Mars Pro/Mars 2/ Mars2 Pro – High liquidity ELEGOO resin makes the print cured quickly, easier to remove and clean – It holds details and colour fantastically, bring you exceptional quality of prints – High accuracy and low shrinkage provides consist result in your work – Low odour making indoor use manageableTips for Better Experience – Shake well before use – Keep your room well-ventilated while printing – Always wear nitrile gloves to avoid direct skin contact – Wash with plenty of water immediately if you get direct skin contact with resinRecommended Settings – For ELEGOO Mars Bottom exposure: 60s, normal exposure: 8s – For ELEGOO Mars 2 Bottom exposure: 35s, normal exposure: 2.5s – Recommeded temperature when printing: 20°C – 25°CHow to Storage – Keep away from children – Keep resins sealed tightly in the bottles – Out of direct sunlight and within 15°C – 35°C – Do not expose resins to heat, flames, sparks or any source of ignitionHow to dispose – Please place it in the water under the sunlight to completely cure the remaining resin before discarding – If you have an empty container of resin, fill it with some isopropyl alcohol to clean the walls of the container, pour it into a clear contained (glass, plastic, plastic bag) and expose it to UV light until the isopropyl alcohol has evaporated and the resin has hardened, and throw it away