Premium quality solid brass UNSWITCHED Lamp Holder with internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use (beware of cheaper, pressed type bases that cannot carry a locking screw). Maximum diameter 32mm, Height 48mm. Choice of 10mm M10 threaded entry or 1/2″ 26tpi threaded entry B22 (22mm), reducing to 7mm cable aperture. B22 Bayonet Cap with Shade Ring, Flameproof ceramic insert, Brass plunger contacts and wiring terminals – Made in the UK
Before installing, switch off electricity at mains. WARNING – ELECTRICITY CAN KILL – IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN
ElekTek Lamp Holder Unswitched Bayonet Cap B22 Half Inch Entry with Shade Ring Bronze
CAD $36.99
- Make sure this fits by entering your model number.
- Standard UNSWITCHED B22 (22mm) bayonet cap Lamp Holder with shade ring – suitable for bulbs up to 200W (for SWITCHED B22 version, ElekTek Safety Switch available in separate listing which cuts power to the plunger contacts when a bulb in not in place)
- Hand assembled – easy to separate for fitting: simply remove the thin upper shade ring by unscrewing anti-clocwise; hold base with the Earth terminal pinched between thumb and index finger and unscrew thicker lower ring by unscrewing anti-clockwise. When re-assembling ENSURE ceramic insert is aligned correctly in base & body alignment slots are aligned with ceramic insert
- Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use (beware of cheaper, pressed type bases that cannot carry a locking screw) – loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring
- This 22mm BC (bayonet connector) lamp holder is intended primarily for attachment to a male 10mm or 1/2″ threaded tube
- WARNING: All metal light fittings must be earthed
In stock
Additional information
| Weight | 0.06 kg |
|---|---|
| brand | ElekTek |
| dimensions | 11.8 x 8.6 x 1.8 cm; 60 Grams |