Single Light Switch Surround
Beautiful shiny acrylic single Light Switch Surround manufactured here in the UK from 3mm high gloss acrylic.
These surrounds are an ideal solution for preventing unsightly finger marks around your Light Switchs and will also add that finishing touch to any room. A stunning design feature for your interior design.
Unlike other types you can buy, our finger plates are mounted behind the switch without any adhesive, so no nasty sticky tape to mess around with. They can be removed leaving no trace on the wall fit, remove the 2 screws from the fitting and angle the surround diagonally over the Light Switch. Make sure everything is straight and refit the 2 screws some cases, you may need longer screws (which are available from most good diy shops) to compensate for the additional thickness of the surround.
Always be very careful not to touch the wires when fitting or if you feel a unsure, contact a local specialist for help.
Designed to provide a 30mm surround around a standard single switch or Light Switch:- Outer dimension: 145mm x 145mm x 3mm / 14.5cm x 14.5cm x 0.3cm / 5.8′ x 5.8′ x 0.12′- Inner dimension: 80mm x 80mm x 3mm / 8cm x 8cm x 0.3cm / 3.1′ x 3.1′ x 0.12′
We manufacture these items ourselves and can adjust size if required. See our other offers for double Light Switch versions and mirrored versions. If you would like the outside dimensions a different size, just ask, we are here to help.
Kindly Note:Item coved in protective film during transport. Please peel off both sidesPurchase is for the advertised Light Switch surround only. Any Light Switch or other objects shown are for demonstration purposes only and not included in the saleerent monitors and printers will have varying colour settings. If you are concerned about exact colour matches, please buy a sample first
ewolds single LIGHT SWITCH SURROUND | square | acrylic back panel or finger plate | plug, font colour:grey
NZD $32.99
- Acrylic light switch surrounds are an attractive decoration for your home, whilst offering protection against wall finger marks
- Fitting is easy, generally the light switch fitting does not need to be unwired to install the finger plate. However please consult a qualified electrician to advise on isolating the mains electricity before attempting to unscrew the socket
- Fits behind your existing sockets. No tape, held in place by your existing sockets
- Squared single socket surround: 145mm x 145mm with 80mm x 80mm cut out and 30mm border
- Made from 3mm coloured acrylic here in the UK. Socket are NOT included
In stock
Additional information
| Weight | 0.08 kg |
|---|---|
| brand | ewolds |
| dimensions | 23.2 x 16 x 1 cm; 80 Grams |