Feature:Improved design with wider power channelsWith this adapter,Simply connect this between your board and your cable, attach the 3 bltouch wires and upgrade your firmware. Compatible with: E3/E3 Pro/E5/CR-10 Mini/CR-10Incompatible with:ANet A8/E 2/E4/CR-8Ensure you connect BLTouch’s 3 pins per the labeling on the board must have a Bootloader flashed to your E3 Board in order to use this. Support for that is not provided. Attention:The pin 27 board makes installing a bltouch or filament sensor fast and easy. .(after firmware update)Make sure to check your wire configuration on your bltouch or filament sensor. The new bltouch sensors should plug right into the board without depining the connector. Left to right: Brown-Ground, Red-5v, Yellow/Orange-SignalDisconnect lcd ribbon ext1 on the control boardConnect Ext1 to the pin 27 boardConnect bltouch to the 3 pins on the pin 27 board. Left to right: Brown-Ground, Red-5v, Yellow-SignalConnect the pin27 to the main board. Make sure to align the header pins from the pin 27 to the main boardage listing:2 x pin 27 board adapter board
Fasizi 2PCS 3D Printer Parts Pin 27 Tools Mini Upgrade Touch Breakout Adaptor Board For CR-10 E5 E3 Pro
AUD $42.99
- Make sure this fits by entering your model number.
- Upgrade parts,compatibility with E3,CR-10,CR-10 Mini, but not work with the E2
- Ensure you connect BLTouch’s 3 pins per the labeling on the board.
- You must have a Bootloader flashed to your E 3 Board in order to use this. Support for that is not provided.
- Connect this between your board and your cable, attach the 3 bltouch wires and upgrade your firmware.
- Simple, high-quality, smart and precise.
In stock
Additional information
| Weight | 0.01 kg |
|---|---|
| brand | Fasizi |
| dimensions | |