Details: 1. Two modes of speed control: External potentiometer: through this potentiometer speed control; External voltage: external 10VDC voltage regulation; Note: The two speed control can not be used at the same time. 2. PG signal for speed output: there is a pulse output of 5V between the connector and the floor. The output frequency is set to P (Hz), the engine class logarithm is N, and the speed is F (RPM). Then the output speed is P = F * N / 60. 3. ALM signal of alarm output: between the port and the earth there is a 5V alarm pulse output. 4. Positive inversion function: F/R: When you press the rocker switch on the corresponding side, the motor steering direction can be changed. With the toggle switch, the white part is up and down and then up and down. 5. Start Stop (Two Control Modes): 1. External switch EN: transmission by switch. 2. Side toggle switch: when toggle switch, the white part is up and down, then to start down; for the toggle switch, the white part is in horizontal direction. Then select the start button. Note: you can only turn one control at the same time, one of the switches is closed and the other is valid. 6. Status indicator: red indicator: two flashing signs in standby time are erased after starting. 7. Insulation resistance: > 100 m at ambient temperature and atmospheric pressure. 8. Insulation resistance: at normal temperature and normal pressure, 0.5 kV, 1 minute Box contents: 1 x motor driver controller with cable.
Fdit WS55-220 BLDC Motor Driver Controller DC 48 V 500 W CNC Brushless Spindle 9.5 x 6 x 3.5 cm / 3.74 x 2.36 x 1.38 Inch Reusable Packaging
AUD $206.99
- Advanced technology: the driver is equipped with low noise level, low vibration, overcurrent protection, overload protection, speed signal output, positive negative rotation control, etc.
- Widely used: the controller can drive the DLDC motor with hall or without reverb.
- ❤ Guard: external potentiometer control/external voltage control. With over-voltage protection, over-current protection, blocking protection.
- Tips: WS55-220 is a cost-effective 3-phase BLDC motor control with high performance. The voltage range ranges from 20VDC to 50VDC. Rated Current: 12A, Current Limit: 15A Storage temperature: -20 Hum ~ + 65 °C, humidity: <80 %, no frost, frost-free
- ❤ Notes: Maximum speed: 20000 RPM, Operating environment: Avoid direct contact with dust, vapours and corrosive gases.
In stock
Additional information
| Weight | 0.24 kg |
|---|---|
| brand | Fdit |
| dimensions | 10 x 7 x 4 cm; 40 Grams |