FIBARO CO Sensor is a HomeKit-enabled carbon monoxide detector using Bluetooth low energy wireless technology. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning. Alarm is signalled with a built-in siren, blinking LED indicator and by sending information to your iOS device.
Fibaro CO Sensor iOS Blueetoth Carbon Monoxide and Temperature Measurer, White
₹21,670
- The CO Sensor alarms about abnormal levels of carbon monoxide concentration with 4 red blinks and 4 loud beeps (every 5 seconds). Alarm is also reported to your iOS device.
- The CO Sensor measures carbon monoxide concentration and reports. If measured value differs from previously reported by at least 5ppm, accessory reports it to your iOS device. Last 2500 measurements are stored in non-volatile memory of the accessory and can be accessed via FIBARO for HomeKit app.
- The CO Sensor measures ambient temperature every 30 seconds. If the measured temperature differs from previously reported by at least 0.5°C (0.9°F), accessory reports it to your iOS device. Last 2500 measurements are stored in non-volatile memory of the accessory and can be accessed via FIBARO for HomeKit app.
- The CO Sensor detects tampering when accessory is removed from its base and reports it to your iOS device. Tampering is indicated withone white blink and beep.
- The CO Sensor measures battery level every 6 hours and reports it to your iOS device. Additionally, if battery level is below 15%, the accessory will report low level battery status to your iOS device and indicate it with one yellow blink and beep.
- To control this HomeKit-enabled accessory, iOS 9.3 or later is recommended.
- Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 9.2 or later or an iPad with iOS 9.3 or later set up as a home hub.
In stock
Additional information
| Weight | 0.202 kg |
|---|---|
| brand | Fibaro |
| mpn | CO |
| dimensions | 6.5 x 6.5 x 2.8 cm |