W68 is a transparent and stain-proof sealer for concrete and unpolished natural stone. It was developed for concrete, terracotta, clinker, stone and unpolished agglomerate surfaces. It works well on very porous and highly absorbent materials. It protects from oily dirt, from coloured stains and limits water absorption. This way, routine maintenance becomes much easier and more effective. It is graffiti-proof: in fact, it prevents the colouring agents of spray cans from penetrating into outside walls, therefore making it easier to remove graffiti. HOW TO USE IT No dilution: ready for use TO USE ITNo dilution:ready for usernal surfaces in terracotta and natural stone and concrete:On a dry and clean surface, spread one coat of [W68] with a paintbrush or fleece in an even manner, soakingthe joints through as well. Apply the product until fully saturated. Do not walk on the area for at least 4 hours. After 4 hours apply a coat of finishing wax to complete the protective cycle, to be selected depending on the desired aesthetic effect: [MATT provides a completely natural effect, whereas, if you wish to havea polished effect use [LONGLIFE], if available for purchase). For satin effect maintenance apply one coat of [SATIN] case of absorbent materials, apply an additional coat of wax one hour after the first wax coat. External surfaces in terracotta, natural stone and concrete:On a dry and clean surface, spread 2 coats of [W68] with a paintbrush or fleece roller in an even manner, soakingthe joints through as well. Apply until saturated. Remove any excess product that has not been absorbed by mopping with a microfibre cloth, before the productdries out. It dries in 4 hours, but do not wet before 24 hours. Maintenance:diluted solution of [CLEANER PRO]NTIONTest the product on a small surface area to check for any colour changes. Do not apply the product outdoors if rain is forecast.
water suspension of organic resins
FILA Surface Care Solutions FILA W68, Concrete Sealer Tile Protector, Provides Long-Lasting Protection on All Unpolished Stone, 1L
₹11,541
- W68 is a transparent and stain-proof protective sealer for concrete and stone that impregnates surfaces in terracotta, clinker, concrete, natural stone and unpolished agglomerates and protects from oily dirt. Fila W68 is a specific product for the protection of absorbent materials such as rough natural stone, terracotta and concrete, which feature a very porous structure. It makes it possible to drastically reduce the absorption of the material without altering its appearance, limiting absorption of water and staining agents, the main enemies of stone materials. It does not provide acid protection.
- FILAW68 is an environmentally friendly treatment; indeed, it is water-based, which makes it possible to drastically reduce working times because the product can be applied even on surfaces with a minimum residual humidity and because it dries in just 4 hours. It is a natural-effect treatment that does not alter the finish and appearance of the material on which it is applied, provides breathable water-oil repellent protection that simplifies cleaning, creating effective stain protection.
- It is indicated on both internal and external flooring. Certified and tested to be “suitable for contact with food”; as it is a water-based product, it has extremely low VOC emissions, is certified GEV-EMICODE and is EC1Plus branded. It therefore contributes to the acquisition of LEED credits according to the US and Italian protocol.
- INDOOR: it is indicated as basic protection before liquid wax application.
- It does not create a surface film, does not alter the frost resistance of terracotta, it is transparent and breathable
- OUTDOOR: can be used as a protector and sealer for concrete and unpolished natural stone tiles.
- It has anti-graffiti properties: by protecting the surface, it makes it possible to easily remove the graffiti while cleaning.
- Our products, specified in the most important cleaning and protection projects worldwide, are recommended by more than 200 manufacturers in the stone and ceramic sectors. FILA products are sought and chosen by all informed consumers who demand the best in surface cleaning and treatment. For more information on this product, scroll down to the “Product Description” box ↴
In stock
Additional information
| Weight | 1.09 kg |
|---|---|
| brand | FILA Surface Care Solutions |
| dimensions | 11.8 x 7.8 x 16.8 cm |