FILA Surface Care Solutions W68 Protective Transparent Anti-Stain for Non-Gloss Surfaces with Natural Effect Protects Porous Materials Without Changing Appearance, 1 Litre

W68 is a stain-resistant protective cover created for terracotta, klinker, concrete, stone and non-glossy agglomerations. Works well on very porous materials that absorb a lot. Protects against oily dirt, stained stains and limits water absorption. In this way ordinary cleaning becomes much easier and more effective. is an anti-graffiti product: it avoids the penetration of the dyes of the cans into the walls on the outside, thus facilitating the removal of graffiti. How to use no dilution: ready to use. Internal surfaces made of terracotta and natural stone and concrete:on dry and clean surface spread with brush or fleece one coat in a row w68, regularly, impregnating wellalso joints. Apply the product to saturation. Do not step on the area for at least 4 hours. After 4 hours roll out, to complete the protective cycle, a coat of finishing wax to choose according to the desired aesthetic effect: (matt row gives a completely natural effect, if you want, instead, for a glossy effect use longlife, if available for sale). For maintenance with satin effect apply a coat of satin row case of absorbent materials, apply after an hour from the first coat of wax, an additional coat of reinforcing wax. Exterior surfaces in terracotta, natural stone and concrete:on dry and clean surface spread with brush or fleece 2 coats below [w68] in a regular way impregnating well even the joints. Apply to saturation. Remove any excess of the unabsorbed product by dabbing with microfibre cloth before the product dries. Dry in 4 hours, but do not wet before 24 hours. Maintenance: diluted solution of cleaner prontionTry the product on a small portion of the surface to check for any color changes. Do not apply the product outside in case of rain.