and height can be freely adjusted, allows you to put your figures in various poses, make them more vivid.
2.Made of premium PVC plastic, strong bearing capacity, not easy to break, stable base for good support, durable for long using.
3.Connections are tight, easy assembly. You can use multiple combinations to create a variety of fighting/battle scenes.
4.The plastic holder can match any style of doll very well, it’s lightweight and portable that you can move it easily.
Material: Plastic
Color: Clear
Size:
1.Base: about 73x93x21mm/2.8×3.6×0.8 inch, 1pc;
2.Lid: about 74×94.5x5mm/2.9×3.7×0.2 inch, 1pc;
3. about 17.5x11x10mm/0.7×0.4×0.4 inch, 4pcs;
4. about 22.5×10.5x4mm/0.88×0.4×0.15 inch, 2pcs;
5. about 15×10.5x3mm/0.6×0.4×0.1 inch, 4pcs;
6. about 24x9x6mm/0.9×0.35×0.2 inch, 2pcs;
7. about 21x23x3.5mm/0.8×0.9×0.13 inch, 1pc;
8. about 34×24.5x34mm/1.3×0.96×1.3 inch, 1pc;
9. about 103x10mm/4×0.4 inch, 1pc;
10. about 75x6mm/2.9×0.23 inch, 1pc;
11. about 50×6.5mm/1.96×0.25 inch, 1pc;
12. about 31x46x7mm/1.2×1.8×0.27 inch, 1pc;
13. Screw: about 10x4mm/0.4×1.5 inch, 6pcs;
14. Nuts: about 5×5.5x2mm/0.2×0.2 inch, 6pcs.
FINGERINSPIRE Action Figure Stand with Thickened Base Bracket Assembly Action Figure Display Holder Doll Model Support Stand with Three-Claw & Storage Box Base for Action Figures or Effects
NZD $61.99
- Thickened Base Holder: Including 1 action figure stand, the base is designed with a box and a cover, which is more stable and more stable than ordinary display stand bases. The bracket adopts a three-claw design, which is suitable for most figures and models.
- Size Display: The size of the base is about 3.7×2.9×1 inch/9.5×7.5×2.5cm; the length of the two bracket rods is about 2.75 inch/7cm. The two rods are connected by screws and retractable, you can adjust the height.
- Sturdy & Thick: These action figure stands are made of high quality plastic material, which are tightly connected and easy to assemble and replace. Sturdy and durable for long-term use.
- Easy To Assemble: The item is shipped non-assembled. Easy assembly required. Please refer pictures to detailed installation introduction. No glue required for assembly, a nipper is required to remove parts from runners.
- Stand Your Models: If you’re sick of your Gundam models and other mechs falling over, or not being able to set them up in a really dynamic pose even though they are highly articulated, then get a couple of these stands.
In stock
Additional information
| Weight | 0.1 kg |
|---|---|
| Brand | FINGERINSPIRE |