LCD Controller Board: HDMI Board Work for 50Pin Mipi LCD Screen Input Power Adapter: 5Vdc More than 1A. Come In Standby Model When Not Input Signal Standby Model Audio Input: HDMI Board Size: 65mm x 64mm x 3mm5.5″ LS055R1SX04 1440X2560 LCD Screen: Display New Mode2, Normally Black, Transmissive Resolution 1440RGB)×2560 Outline Size 70.94 ×128.49×1.45(H×V×D) Display Area 68.04× 120.96 (H×V) Brightness 450 cd/m² (Typ.) Contrast Ratio 1300:1 (Typ.) (TM) Viewing Angle 80/80/80/80 (Typ.)(CR≥10) [Left / Right / Up / Down] Signal Interface MIPI (2 ch, 4 data lanes) , 50 pins , Connector Backlight WLED Input Voltage 1.8/5.75/-5.75V (Typ.)(IOVCC/VSP/VSN) Packing list : 1× HDMI To Mipi LCD Controller Board 1× 5.5inch LS055R1SX04 1440X2560 LCD Screen 1× Signal Cable 1× Converter BoardInstuction: 1 HDMI signal is not accept. It shows black Image and LED flashing on main board. Please change HDMI source for test. 2 HDMI accept. It shows correct image and LED is blue. This Board work with PC and Raspberry Pi. The image not support Scaling. It shows image depend on HDMI input source. Turn On： 1-2-3-5-4. Turn Off： 4-5-3-2-1 For PC: 1 of MIPI screen for vertical display. Need to adjust computer graphics mode. 2ication Mode – Extended mode – Vertical and Horizontal adjustment For Raspberry Pi 1 Main Board Four Locating Holes Compatible With Raspberry Pi. 2erent Raspberry Pi are set differently. Please connect with Raspberry Pi Technical support
For 3D Printer 5.5″ LS055R1SX04 1440×2560 2K IPS LCD Screen and 5.5inch HD-MI to MIPI LCD Controller Board
£216.99
- Make sure this fits by entering your model number.
- 【Screen Advantages】 High resolution:1440×2560 2K,Display Area 68.04× 120.96 (H×V)mm,Brightness 450 cd/m2 (Typ.),Contrast Ratio 1300:1 (Typ.) (TM),Viewing Angle 80/80/80/80 (Typ.)(CR≥10) [Left / Right / Up / Down],Signal Interface MIPI (2 ch, 4 data lanes) , 50 pins , Connector,Backlight WLED,Input Voltage 1.8/5.75/-5.75V (Typ.)(IOVCC/VSP/VSN)
- 【LCD Controller Board】Video input:HD-MI ,Input Power Adapter: 5Vdc More than 1A.,The function for this board is to light up the screen. Please use in insulated environment.
- 【Applications】 This screen with board is widely used to DIY projectors and light curing 3d printing,High resolution to make sure your printing is very precision.
- 【Plug and play】Easy to install, connecting cables and ports according to link picture details ,the screen can work well after powering there is any problem,Pls provide some connecting pictures, we will give you best solution in 12 hours.
- 【Packing lists】1× HDMI To Mipi LCD Controller Board VS-HDMITMIPI-V1,1× 5.5inch LS055R1SX04 1440X2560 LCD Screen,1× Signal Cable,1× Converter Board
In stock
Additional information
| Weight | 0.3 kg |
|---|---|
| brand | LCDBOARD |
| dimensions | 18 x 12 x 10 cm; 300 Grams |