Attention ! We promise this teflon tube is 100% genuine Capricorn bowden tube, we can provide you an authorization letter if you need. Thank you. Sovol Genuine Capricorn premium XS series bowden Tubing is enhanced with a proprietary blend of high performance additives, which make our XS Series tubing the lowest friction Bowden tubing on the market friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved. It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print. The Inner Diameter of 1.95 mm reduces the “wiggle room,” or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems. High Temperature Resistance due to using only the highest quality PTFE. Specification: PTFE Teflon Tube Material: PTFE (Poly Tetra Fluoro Ethylene) Outside diameter: 4 mm Inside diameter 1.95 mm ± 0.05mm Tube Length: 1.2 M PC4-M6 Fittings PTFE Tubing OD:4mm Inner Diameter:4mm Thread: M6 Material: Brass+Plastic PC4-M10 Fittings PTFE Tubing OD:4mm Inner Diameter:4mm Thread: M10 Material:Stainless Steel+Plastic Package Included: 1 x Capricorn Bowden PTFE Tubing XS Series 1.2 M 1 x PC4-M6 Quick Fitting 1 x PC4-M10 Straight Pneumatic Fitting
Genuine Capricorn Bowden PTFE Tubing XS Series 1.2 M with 1 piece PC4-M6 Quick Fitting and 1 piece PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer
HKD248.11
- 100% Capricorn bowden Tube – High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.
- High Lubricity Additives – Makes our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 1.9mm ± 0.05mm Inner Diameter – Outside diameter 4mm, inside diameter 1.95 mm ± 0.05 mm which reduces the “wiggle room,” or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden system
- Compatiblity – It was developed specifically for 1.75mm filament with an extremely precise internal diameter. When printing flexible filaments in a bowden system, the inside diameter of bowden liner is one of the critical feature for the successful print
- Package Included – 1 piece Capricorn Bowden PTFE Tubing XS Series 1.2 meter, 1 piece PC4-M6 Quick Fitting and 1 PC4-M10 Straight Pneumatic Fitting. If you have any question, please feel free to contact us. Thank you.
In stock