Groov-e 10W Wireless Car Mount In-Car Phone Holder with Wireless Charging

The groove-e wireless car mount lets you charge your phone wirelessly in portrait or landscape mode while having it mounted to either your air vent or window. For using the air vent mount, make sure the mount is securely fitted to the phone holder before attaching it to the vent. Then insert the micro USB end of the supplied power cable into the base of the phone holder. Insert the USB A connector of the cable into a USB charge port or a suitable car charger plugged into the vehicles 12v power outlet. Insert your phone into the holder which is held securely in place by the holder rubberised grips. Ensure that the charging area of the phone is aligned correctly with the centre of the holder and your phone should then begin to charge. For using the window mount, make sure the mount is securely fitted to the phone holder before attaching it to any surface. Make sure the surface you are going to use is clean. Place the suction mount against the windscreen and press down the clamp to secure it in place. To remove the window mount bracket, release the clamp and remove from the windscreen aided by pulling the small tab on the suction cup. Then insert the micro USB cable as explained above and insert your phone to start charging. The both mounts rotates 360 degrees, so you can use your phone in portrait or landscape mode and adjust the viewing angle easily using the swivel joint. Fits devices that are between 53-97mm wide.