With three patch sensors, this pickup piezo has good performance and excellent effect. It can be used in a wide range of instruments, such as guitar, Quad, mandolin, banjo and so on. It can effectively eliminate noise and make your performance better.
Features:
1. 【WIDE RANGE OF APPLICATION】This pickup piezo can be applied to a variety of musical instruments, such as guitar, four string instrument, mandolin, banjo, etc.
2. 【ELIMINATE INTERFERENCE】This pickup piezo can eliminate external interference sound, and is not affected by sound reflection of nearby objects.
3. 【WITH THREE SENSORS】This pickup piezois equipped with three sensors, which are pasted on the instrument to minimize the damage to the instrument body.
4. 【EASY TO USE】This pickup piezo is easy to install and can transmit good sound quality. It is a very excellent instrument accessory.
5. 【CONVENIENT MAINTENANCE】The pickup piezo can be replaced with tail pin and installed with watch strap, which is very convenient.
Specification:
Condition: 100% Brand NeS
Material: Metal + Plastic
Cable Length: Approx. 60cm / 23.6in
Jack Size: 6.35mm
Pickup Diameter: Approx. 3cm / 1.2in
Weight: Approx. 36g
Packing List:
1 * Pickup Piezo
1 * Cable Tie
1 * Block
Installation Method
1. Remove the tail nails and widen the tail holes to the appropriate width (about 1-1.5cm in diameter)
(without tail nails, find the right position to open the hole)
2. Stick the patch to the position that is most acceptable for vibration, usually below the bridge
3. Attach a fixing pad to the appropriate position and fix the long connecting wire to the fixing pad with a fixing strip.