GXY RFID Reader Writer ID/IC Duplicator Copier Encrypted Card Decoder 125KHz / 13.56MHz Cloner Support NFC Phone/Wristband

Specification:Dimensions: 96 x 65 x 15 mmInterface: USB full speedWorking Voltage: DC 5VCurrent: working 200mA, standby 50mA, normal 100mAWorking Frequency:ID type: 125KHz, 250KHz, 375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000KHzIC type: 13.56MHz(ISO1443A/B)Support Card Type:125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc.13.56MHz IC type: UID FUID CUID UFUID IC Half-encryption, IC Full-encryption etc to Read and Write 125KHz RFID card1) Set ”LF Card” interface2) Put the card on the device and press ”Read” on the software to scan the card3) The software will scan and display the card number4) Put the writable key cards on the device, and press ”Write” on the softwareHow to Read and write 125KHz RFID card1) Set ”HF Card” interface2) Put the card on the device and press ”Card Number” on the software to scan the card3) Put the writable key cards on the device, and press ”Write card” on the softwareHow to Decode NFC mobile phone or NFC smart bandPhone > Wallet > Swipe Card > Add Now > Choose the Type of Add > Key > Simulate a physical access card, the encryption card is a simulation failure1) Put the encryption card on the reader > start decoding > save data as another > save the data to the folder2) Put the UID card on the reader > Write UID card > format3) Use UID card to simulate physical access card on mobile phone After the simulation is successful, click the card cover and show success4) Put the phone on the reader > Start decoding > format > Import data (encrypted card data) > Write ordinary MF1K cardAttentions:1, Not support HID type key cards.2, The software doesn’t support Mac and Linux system.3, This card copier doesn’t work with the key cards which already read or wrote by other card copier.