ncy generation and control: 1-60MHz
Source impedance: 50 ohms
Stability: +/- 100 ppm
Spectral purity: harmonic reduction>-TBD dB above 60 MHz
Step size: user-configurable increments are 100Hz, 1kHz, 10kHz and 100kHz
Available measurement range: SWR: 1.0 to 9.99
Impedance: about 5 to 2000 ohms
RF output: adjustable: 2.0 Volts pp (typical value)
Power supply: External power supply: 12-15V DC, 500mA
Control: Button (5): “Mode”, “Band”, “Configuration”, “Scan”, “Up”, “Down”
Switch: “Power On”
Connector: RF output: BNC
USB: Mini-B socket
External power supply: 2.1mm power jack (center pin positive)
Size: 14.8*8.7*3.3cm
Application:
Adjust the antenna tuner and determine the loss
Measure inductance and capacitance
Measure coaxial transmission line (SWR, length, speed factor, approximate Q and loss, resonance frequency and impedance)
Determine the characteristic impedance of the transmission line
Coaxial cable loss
Determine antenna tuner loss
Measuring balance-unbalance changes
Measuring inductor Q
Estimate quartz crystal parameters
Measure magnetic ring resonance and SWR
Packing list:
SARK100 Antenna Analysis Instrument*1