Homematic IP 143159A0A Wall Thermostat with Humidity Sensor – White

The Homematic IP Wall Thermostat with Humidity Sensor is part of the Homematic IP smart home system and enables direct control of several Homematic IP Radiator Thermostats in one room. Furthermore, the device can be operated independent from the system for direct control of Homematic IP Floor Heating Actuators. In this use case, no Homematic IP Access Point or Homematic Central Control Unit CCU2 are necessary for installation and operation. Thanks to the radio communication, the wall thermostat and the floor heating actuator can be directly connected as no cables have to be laid. Compared to other floor heating control systems, the Homematic IP floor heating control offers less installation effort but at the same time includes the benefits of an intelligent heating control system with room-by-room control. The wall thermostat with the dimensions of a light switch can be operated intuitively using the control wheel. The adjustable temperature can be defined precisely in 0.5 °C increments and is transferred automatically to the Homematic IP Radiator Thermostats or Floor Heating Actuators afterwards. If electrical heating devices are used, the temperature can be regulated via the Homematic IP Pluggable Switch. If desired, the Homematic IP skill for store Alexa can be used to control the Homematic IP Wall Thermostat comfortably via voice control. The integrated illuminated display shows the setpoint and actual temperature as well as the humidity that is measured via the integrated sensor. If the boost mode is activated by pressing the control wheel shortly, all radiator valves are opened to 80 % for a period of 300 seconds. Thus, the room temperature is heated quickly. The display of the wall thermostat shows the countdown until the program for heating up is finished. In addition, the wall thermostat supports up to six adjustable profiles including individual temperatures, offering time-controlled regulation of the room temperature. Here, up to 6 heating and cooling phases with 13 switching times per day can be configured. The Homematic IP Wall Thermostat is easy to install. Due to the power supply with two AAA batteries and the radio communication, the wall thermostat can be positioned anywhere in the room. The corresponding screws and plugs as well as a set of double-sided adhesive tape are supplied. If you plan to mount the wall thermostat on a corresponding flush-mounted box, you can find the suitable mounting holes on the mounting plate. Also, integration into multi-gang frames of other manufacturers is possible.