ICY BOX Raspberry Pi Case

The ICY BOX SBC (Single-Board Computer) case IB-RP103 is the perfect Raspberry Pi accessory. It was developed for the first and second generation Raspberry Pi series Model B – it fits Raspberry Pi 3 Model B+, Raspberry Pi 3 Model B and Raspberry Pi 2 Model B. However, since other single board computers use the same layout as the Raspi Model B, the case also fits Asus Tinker Board, Asus Tinker Board S, FriendlyArm NanoPi M4 or Banana Pi M2 Berry case consists of a black plastic frame in which the mini computer is mounted with screws. On the sides there are two air-permeable perforated grids, which can also be removed for easier mounting. The top and bottom of the case are made of transparent acrylic, so you can take a look at the board and status LEDs at any time. Note: There may be protective films on the acrylic, which can easily be removed if necessary scope of delivery includes three self-adhesive heat sinks in different sizes, which provide passive cooling. For more demanding applications, the cooling can also be supported by a fan, which can be easily mounted on the top of the case if required. In this case, the case comes with a second acrylic top, which has a corresponding fan opening and suitable drill holes for a 30×30 mm fan. A fan is not included. The other acrylic upper side is completely closed and intended for fanless use SD card almost completely disappears into the case and is thus well protected. With a little fingertip sensitivity or a pair of tweezers it can be easily removed. All connections of the Raspberry Pi board are still accessible, also an opening for a GPIO cable is available in the side rail.