Incremental Magnetic Rotary Encoder 1024P/R DC5V Absolute Type Photoelectric Encoder 38mm OD 6mm Shaft with 1.2m Cable

Specification: Model: HAJ1024 Readout mode: Non – contact Output mode: Voltage output, collector output, complementary output, push pull output, long line drive output, differential output, fork output Output phase: A, B External diameter: 38mm The diameter of axle: 6 mm Standard length of wiring wire: 1.2m Resolution (pulse/rotation) : 1024P/R Wiring method (8 wires) : Brown wire: dc5v (positive pole) Blue wire: 0V (negative pole) Black wire: A(phase) White wire: B(phase) Shielding network cable: N.C (ground) Output A difference: A, B phase difference of 90±45(1/4±1/8T) Output mode: NPN open collector output Output capacity: external voltage: under DC30V, synchronous current: under 35mA, residual voltage: under 0.4v (synchronous current: under 35mA) Output up and down time: 1 s or less Control the output voltage: 5 v load resistance 1 kΩ Starting torque: below 0.9mN.m Inertia moment: 1 x10-6kg.m2 (below 600 pulses/rotation: 3 X 10-7kg.m2) Axial allowable force: Radial: 30 N The axial: 20 N Maximum number of rotations allowed: 6,000r/min Protection circuit: load short circuit protection, power supply reverse wiring protection Ambient temperature range: action: – 10 ~ + 70, save: – 25 ~ + 85(not frozen) Range of ambient humidity: 35 ~ 85%RH each during operation and preservation (no condensation) Insulation resistance: more than 20mΩ(DC500V megger) of charge between the whole and the shell Voltage resistance: AC500V 50/60hz 1min between the whole charging part and the shell Vibration (durability) : 10 ~ 500Hz complex amplitude 2mm or 150m/s2 Impact (durability) : 1,000m/s2 3 times in X, Y and Z directions Cable length:1.2m/3.9ft Package list: 1 x Encoder