InnoMaker USB to CAN Converter Module for Raspberry Pi4/Pi3B+/Pi3/Pi Zero(W)/Beaglebone/Tinker Board any Single Board Computer Mac Os equal/above v10.11/Big Sur

InnoMaker USB2CAN module is a ‘plug and play’and bi-directional port powered USB to CAN converter which realizes long-distance communication between your Raspberry Pi/SBC/PC and other devices stably though CAN- Bus connection. With small size and convenient operation, It’s a cost-effective solution that are safe and reliable for all your data-conversion / device-protection applications for any experienced engineer interfacing to expensive industrial equipment yet simple enough for home use by an amateur hobbyist. Support Normal mode,Silent mode and Loopback mode three modes in all system. and we provide a simple test demo tools for customer in Linux/Mac Os, So it can be used as a portable CAN data analyzer. USB2CAN can also be applied to obtain the data of car via the OBD connector, but you need to configured and secondary development by yourself. Mac OS: Provide the dynamic Library (Over IOUSBKit) to access usb can device and objc Demo for Mac OS equal or above v10.11. Linux: Provide the C/Python demos with Socket-CAN for Raspbian(Linux,Ubuntu). Support can-utils tools and any other socket- can tools. Technical Specification: CAN: D-SUB, 9 pins USB: USB 2.0 Full-Speed, Micro USB Specification: 2.0A (standard format) and 2.0B (extended format), ISO 11898-2 High-speed CAN Data Rate: From 20kbps to 1Mbps can be programmed arbitrarily Isolation Voltage: 1.5K VDC/min, 3K VDC/1s Microcontroller: STM32F0, 48MHz Termination: 120 Ohm resistor selectable jumper CAN Transceiver: ISO1050DUBR ,Texas Instruments Work Temperature: -40°~ 85° Relative humidity: 15-90%, not condensing PCBA Size (L * W * H): 56.50mm * 31.20mm * 14.20mm Weight: 15.5 g