iReijomoi PK-L2312UG PL-L2312UP PK-L2313UG PK-L2313U Replacement Lamp with Housing for JVC DLA-X900R DLA-X700R DLA-X500R DLA-RS46U DLA-RS48U DLA-RS4810U DLA-X95R Projectors

iReijomoi Replacement projector lamp.
Premium quality, high brightness, true color and clear gorgeous pictures, long lifespan,installed in your projector to provide you and your family with pursuit of visual enjoyment.we are eager to take you into a high-definition bright and dynamic world.
Lamp Model
PK-L2312UG PL-L2312UP PK-L2313UG PK-L2313U
Compatible Projector Model
For JVC DLA-X900R DLA-X700R DLA-X500R DLA-X95R DLA-X75R DLA-X55R and DLA-X35 D-ILA DLA-RS46U DLA-RS48U DLA-RS4810U DLA-RS49U DLA-RS4910U DLA-RS56U DLA-RS57U DLA-RS66U DLA-RS67U DLA-RS6710U DLA-X35B DLA-X500R DLA-X55R DLA-X55RB DLA-X70RBU DLA-X700R DLA-X75R DLA-X900R DLA-X95R DLA-VS2200 DLA-VS2200G.
Package Included
1* Projector Lamp Bulb with Housing(Packing box with Foam bladder)
A Crystal Clear Image
Forget all about dull images –iReijomoi ’s projector lamp will give out a bright High Definition image and elevate your screening experience!Realistic image give you an immersive viewing experience.
Whether you’re using the projector to watch movies,watch animation,watch ball games,play games and so on,the image will always be bright, clear and pleasant!
It’s Time To Replace Your Projector Lamp
You need to replace the Projector Lamp in the following situations:
1. Flickering Light. …
2.Compromised Fabric Wiring. …
3. Tears in the Shades. …
4. Damaged Electrical Cords.
No worries iReijomoi ’s projector lamp uses safe and reliable material.(New High-Quality Wick ,NEW Coating Process Light Cup,NEW Heat-Resistant Housing and Standard Cable Assemle and Connecting)You can use the lamp for projector at different environments and different occasions.(Meeting,School ,Cinema,Home Theater,etc )
Easy to Install
1,Turn off the projector and unplug the power cord. （Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot. ）
2, Loosen the screws on the back cover of the projector and remove the cover.
3,Remove the lamp cover from the projector,loosen the screws that secure the inner lamp,pull the lamp out of the projector.
4,Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the screws.
5, Close the back cover and tighten the screws then enter the menu setting to restart the lamp usage time.
NOTE: Allow plenty of space around the projector’s fan or exhaust so excess heat can be dispersed properly.