JASAG ID IC HID Card Copier, NFC Reader, 125KHz 13.56MHz 10 Frequency RFID Key fob Cards Reader/Writer/Duplicator, UID Decoder, USB Copier, with 10PCS Rewritable Key Cards

Product Descriptions If you buy the RFID copier + 5pcs UID keyfobs + 5pcs T5577 cards, The 5pcs UID keyfobs are working with 13.56MHz frequency, used to copy the Mi-fare 1k card 5pcs T5577 cards are working with 125KHz frequency, used to copy the EM4100, TK4100 cards. They are different types of cards. These 5pcs white cards are T5577 (EM4305) type, they have no data before written. They can be read successfully after finish written from your TK4100 or EM4100 type cards. This product has USB interface, you can use the USB line as the power line. Also working with 4*AAA battery, standard handset, easy to carry (batteries are not included in the package). When you connect this product to a computer, you can find the software disk on the computer. If it doesn’t displayed on your computer, you can also ask me for the software link. How to read and write normal RFID cards? First of all, you should know that some of key cards can not be written or changed, such as EM4100/TK4100 ID card, etc.1. Press the “on/off ” button. 2. Put the cards on the back of the copier. The copier will be show the “Waring” page. Press “OK”. 3. Put the cards on the back side of the copier and press “scan”. 4. The copier will scan and show the card number. 5. Put one writable T5577(125khz writable chip) or UID(13.56mhz writable chip) card on the back side of the copier and press “Write” to crack encryption 13.56Mhz cards? When the 13.56mhz cards have encrypted, it should be using the software to crack the cards. This super RFID copier can crack most of encryption cards. (please not use it to do the illegal things!) 1. Connect the device to computer with the USB cable. 2. Then you can see and open the software on your computer. 3. Press the OK button to enter the decryption. 4. Press “Read” to start decryption. 5. The “√” means decrypt succeeds, “X” means failure.