JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; slide tape replacement on top of track saws, dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on a blue poly liner. Made in the U.S.
JVCC UHMW-PE-20 UHMW Polyethylene Film Tape: 1/2 in x 18 yds. (Natural/Translucent)
£86.99
- JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications.
- Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement.
- Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; slide tape replacement on top of track saws, dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications.
- Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic. Release Liner: blue poly film.
- Thickness: 21.8 mils (carrier, adhesive) 1.8 mils (adhesive) 20 mils (carrier). Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 50 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter.
In stock
Additional information
| Weight | 0.136 kg |
|---|---|
| brand | J.V. Converting |
| dimensions | 14.3 x 14.3 x 1.24 cm; 136.08 Grams |