JVCC UHMW-PE-3 UHMW Polyethylene Film Tape is a 3 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction make this a versatile engineering material for many severe service applications. Materials slide freely over the tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on either a white paper or a blue film release liner. Made in the U.S.
![JVCC UHMW-PE-3 UHMW Polyethylene Film Tape [3 mil Carrier]: 1/2 in. x 5 ft. (Natural/Translucent)](https://images-na.ssl-images-amazon.com/images/I/51can3bbXkL._AC_SL1164_.jpg)
![JVCC UHMW-PE-3 UHMW Polyethylene Film Tape [3 mil Carrier]: 1/2 in. x 5 ft. (Natural/Translucent) - Image 3](https://images-na.ssl-images-amazon.com/images/I/61nSAPCmG%2BL._AC_SL1226_.jpg)
JVCC UHMW-PE-3 UHMW Polyethylene Film Tape [3 mil Carrier]: 1/2 in. x 5 ft. (Natural/Translucent)
₹3,828
- JVCC UHMW-PE-3 UHMW Polyethylene Film Tape is a 3 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction make this a versatile engineering material for many severe service applications.
- Materials slide freely over the tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement.
- Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners.
- Standards Met: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic. Release Liner: white paper or blue film.
- Thickness: 9 mils (carrier, adhesive, liner) 5 mils (carrier, adhesive) 2 mils (adhesive) 3 mils (carrier) 4 mils (liner). Adhesion: 50 ounces per inch (to stainless steel test panel). Tensile Strength: 18 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter.
In stock
Additional information
| Weight | 0.005 kg |
|---|---|
| brand | Brand: J.V. Converting |
| dimensions | 8.26 x 8.26 x 1.24 cm; 5 Grams |