Features:
Install 80/60/42/30 mm M.2 NGFF SATA SSD to Raspberry Pi via USB. Both USB micro-B connector and USB 5pin pinheader connection to Raspberry Pi. USB2.0 5Pin Pin Header Assignment: 5V, D-, D+, NC, GND On board activity LED for M.2 access. M.2 NGFF type 2280-D5-B connector on board. Movable M.2 NGFF stand-off and multiple platform-holes supports type 2280, 2260, 2242 and 2230 SSD. Supports dual-sided SSD module 1.5 mm component height on the top and bottom side. Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps) Compliant with open Host Controller Interface Specification for USB Rev 1.0a Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95 PCBA powered by Raspberry Pi USB Bus Jumper selection either PWR-U external 5V sufficient power or Raspberry Pi own USB bus power to M.2 SSD Fully RoHS compliant
Kalea-Informatique © Extension Plate for Raspberry Pi IoT – 1 Port for SSD M2 (M.2 NGFF SATA) – Professional Range / High Quality Components
₪304.99
- Make sure this fits by entering your model number.
- Add On Card for Raspberry Pi M.2 NGFF (SATA) to USB Card
- Compatible with M2 SSD type SATA in B or B+M Key, For 2242, 2260 and 2280 format, Accepts dual-sided SSDs, Supports throughput up to 6GB.
- Compatible with USB 2.0 (480MBps), backward compatible USB 1.0a, 0.95, connection to the Raspberry on two interfaces: either via USB Micro B plug or directly via internal USB connector with 5 pins, USB connector assignment: 5V, D-, D+, NC, GND.
- Power supply of the M2 card, either from the 5-pin USB connector or from a 2-pin plug (fan-type) – choose the power source thanks to a jumper. Power of the plate via Raspberry USB Bus
- Supplied with the brackets to mount the board on your Raspberry, and with fixing screws for the SSD. Activity diode for M2 board.
In stock
Additional information
| Weight | 0.06 kg |
|---|---|
| brand | KALEA INFORMATIQUE |
| dimensions | 14.2 x 10.4 x 4.4 cm; 60 Grams |