LIGHTEU, DC 12V 3.8LPM 2,8 bar 23A Series IP54 Self Priming Automatic Demand Diaphragm Pump for RV, Yacht, Garden, Camper

304.99

  • SPECIFICATION2.8 Bar/40PSI, DC 12V Max 4.2 Amp. Flow rate: 4.3L/Min, 2-chamber. Hose connection 10 mm.
  • AUTO START&STOP40 PSI Shut-off Pressure. On demand water pump automatically starts and stops when you turn your faucet on and off. It is normal to find water in a brand new pump since all the pumps are tested thoroughly before sending out for sale.
  • SAFE AND DURABILITY12V water pump Integrated thermal protection and run-dry protection design, protecting from damage if the water pump runs dry.
  • Wide ApplicationsWith self priming function, the pump transfer fresh water with 12V DC can act as a freshwater washdown pump for RV, Yacht, Garden, Camper.
  • Waterproof grade IP54Waterproof grade IP54 with extra cover. don’t let it rinsed in water. It does not work with thick liquid like Oil or Fructose. If you want to connect a reverse osmosis filter or carbon filter or heater after the pump, please make sure the default flow rate and pressure is suitable. We recommend to use the pump with bypass function.

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

The LIGHTEU pressurized water pump is hard enough for any bilge.
The 23A-Series Pumps are compact and designed for a wide range of applications including liquid transfer, spraying, circulation, filtration and dispensing. The 23A series of diaphragm pumps are self-priming and can be run dry without harm. It provides up to 1.0 gallons per minute. Miniature multi outlet water pressure pump serves 1 or 2 3/8” (10 mm) outlets at any one time. This compact automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when faucet is opened and closed.

TYPICAL APPLICATIONS
Marine, RV,
Agricutural Spraying, General Industial, Filtration, Beverag Processing, Solar Water System.

INFORMATION

Type:2 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
Control Type: Switch & By pass
Max Recommended Temperature:60° C (140° F)
Priming Capabilities:4 feet (1.2 m) suction lift
Re-start Pressure Shut-off Pressure 35 PSI: 25 PSI ±5 PSI (±0.3 bar)
Inlet/Outlet Ports: 5/8″ hose barb
Weight:1.54 lbs (0.7 kg)

MOTOR

Leads:18 AWG, 14″ (35 cm) long with 2-Pin connector / Leads
Duty Cycle:Intermittent
Max.Amp Draw:4.0 A
Fuse:6.0 A
STANDARD PUMP CONFIGURATIONS
Voltage:12V
Open Flow(GPM/LPM):1.0 / 3.8
Max Draw:4.0A
Shut-off Pressure(PSI/BAR):40 / 2.8
Valves:EPDM
Diaphragm:Santoprene

Additional information

Weight 0.7 kg
Brand

LIGHTEU