A special product from the LITHOFIN-Range. This water-based product is ready to use and contains a combination of high-quality natural waxes and additiveserties:Lithofin MULTI-SEAL forms a natural satin sheen protective film, which prevents water, dirt and oil from penetrating into the surface making it easier to maintain. Rough surfaces become scuff resistant, smoother and therefore easier to clean. Surfaces maintain their natural colour, the overall appearance is improved through a satin sheen.nical Data:Density: ca.1.0 g/cm³pH-Value: 8-9Appearance: liquid, whitishOdour: nearly odourlessField of Use:For sealing natural stone such as slate, limestone (rough and honed) as well as quarry tiles, engineered stone, concrete slabs and terracotta. Formulated as a finishing treatment after impregnation with Lithofin MN Stain-Stop, Lithofin KF Stain-Stop or any other suitable Lithofin impregnator. Not suitable for outdoor usections for Use:The surface to be treated must be clean and completely dry. Apply Lithofin MULTI-SEAL undiluted and spread evenly with a brush, roller or sponge. Two to three coats will generally be needed in order to achieve a uniform appearance. Allow one to two hours drying time between coats Please Note: Always try the product in an inconspicuous area prior to use. Always treat the entire surface. The surface temperature should be between 5°C and 25°C. Avoid or immediately remove splashes from wood, glass, varnish and other sensitive areas. Do not walk on the surface until it is dry. Clean application equipment with waterrage:approx. 7 to 12m² per litre depending on the surfaceng Time: Dry after about 4 hours. Resilient after about 24 hours. Completely dry and hard after about 48 hoursce:All porous surfaces should be imp
Additional information
| Weight | 1.08 kg |
|---|---|
| brand | Lithofin |
| dimensions | 20.6 x 11 x 7 cm |